BEFORE ORDERING: Be sure to check your local building and zoning codes, and ensure that all appropriate permits have been acquired. This product is for residential use only. Recommended for children ages 3 – 11.
The PlayMaker II Swing Set by Gorilla Playsets is loaded with all the safety features parents demand and the exciting play features kids crave, in an overall footprint that fits nearly any backyard. We’ve included a large sandbox with corner seats, a combo entry ladder & rock wall, an Alpine Wave Slide, 2 belt swings, a trapeze bar, a chalkboard kit, a tic-tac-toe spinner panel, and even a telescope & periscope. No other swing set packs as much fun into a space measuring 14’6”W x 12’ D.
The PlayMaker II is a premium cedar wood swing set that is pre-cut, pre-sanded, pre-stained, and ready to assemble in your backyard over the weekend. Gorilla Playsets cedar naturally resists rot, decay, and insect damage. This swing set is finished in a beautiful factory applied redwood stain. The play deck is covered with a super strong vinyl canopy and includes a semi-enclosed playhouse featuring 2 decorative windows!
Tons of play packed into a compact footprint!
The PlayMaker II will fit nearly any backyard and still features all of the play features your kids crave – two swings, a trapeze swing, a super fun Alpine Wave Slide™, a chalkboard kit, a tic-tac-toe spinner panel, and even a telescope & periscope! No one will be complaining that they’re bored with so many fun play zones available!
We’ve added two decorative windows to the upper-level playhouse to add even more interest to your backyard. These fixed windows partially enclose the upper deck and will give your kids their very own ‘house’ outside! Imaginations will soar!
Pre-sanded & pre-drilled lumber
Our PlayMaker II uses 3×3 and 4×6 cedar lumber for superior durability and support. We discovered early on that we could sand the lumber at our factory, twice, for extra peace of mind. Our wood comes out smooth, beautiful and ready to use. We even pre-drill the main beams to make installation even easier and save you time.
Our hardware consists of oversized bolts and heavy lag screws that are electro-galvanized to prevent corrosion. We bolt our iron swing hangers completely through our swing beams with locking carriage bolts. The swing beam itself is attached to the play tower using a 16-gauge steel plate. Our swing chains are rated to 800lbs and safety coated to prevent pinching of little fingers. Decks, wall slats and wood roofs all use commercial grade zinc-coated deck screws. Nails, which can work loose, are never used in the construction of our swing sets. For added safety, we even recess bolts into the wood and cap them.
- Standard or Cordless Drill w/ Phillips Bit (#2 square bit provided)
- 3/8” Drill Bit
- 1/2” and 9/16” Wrench and Socket
- 1/2” and 9/16” Deep Well Sockets
- Tape Measure
- Masking Tape
- Extension Cord (if using standard drill)
- Locking Pliers (Vise Grips)
Assembly: Approximately 6-8 hours. Includes all hardware, lumber, accessories, and instructions. It is recommended that you leave at least a 6’ perimeter around your swing set.
- Assembled Dimensions (total footprint): 14’ 6”W x 12’D x 10’H
- Brand: Gorilla Playsets
- Height: 10’ ft.
- Width: 14’6” ft.
- Material: Wood
- Depth: 12’ ft.
- Limited 10 year warranty on wood
- Limited 1 year warranty on other accessories
Please contact Gorilla Playsets™ Customer Service direct if you have questions about the product, warranty, or need replacement parts. Call 1-800-882-0272 Monday through Friday, 8:00 AM-5:00 PM ET, excluding holidays.